At present, many places are using air heaters. If there are problems with the equipment during use, such as the air outlet not being ventilated during use. So what is the reason? How should we solve it? Next, the editor sorted out several possible reasons that may cause the fan to not vent, hoping to be helpful to everyone.
1. Guide vane swing fault
Industrial air heaters are a common heating equipment commonly used in large areas such as factories or warehouses. Its main working principle is to guide the flow of air through guide vanes, in order to evenly blow hot air to the area that needs to be heated. However, if the guide vanes fail to swing, it will affect the normal operation of industrial heaters.
Once the swinging blade drive motor of an industrial heater is damaged, there will be a decrease in wind power. This is because the guide vanes cannot operate properly and cannot effectively guide air to the area that needs to be heated. In this case, it is recommended to immediately contact the factory or professional maintenance personnel for repair. To ensure that the industrial heater can resume normal operation in a timely manner, it is best to return to the factory or find a dedicated person for maintenance. Factory maintenance personnel possess professional knowledge and skills to quickly locate problems and make timely repairs. Finding professional maintenance personnel for repairs can ensure the quality of repairs and avoid greater losses caused by self repair.
2. The remote control of the heater is malfunctioning
A heater is one of the essential household appliances in winter, which can provide warm and comfortable air for our living room. However, even the most advanced products may inevitably encounter some minor issues. For example, the remote control suddenly malfunctioned. When we pressed the button on the remote control, the fan did not respond, as if it had entered a deep sleep state. At this point, we need to wake up, walk to the side of the fuselage, and press the switch button on the fuselage.
After pressing the button on the body, if the fan starts working and warm air flows out, the problem is likely to be on the remote control. We can try replacing the battery on the remote control to see if the battery is low and unable to function properly. If the battery is still not used after replacement, then it is necessary to consider contacting maintenance personnel or purchasing a brand new remote control. Maintenance personnel may need to inspect the internal circuit of the remote control, find the cause of the malfunction, and carry out repairs. However, if the maintenance cost is high or the remote control has been in use for a long time, we can consider replacing it with a new one. The new remote control ensures that we can easily control the heater and enjoy comfortable warmth.
3. Overheat circuit protection system
A heater is a commonly used electrical appliance in our daily life, which not only brings us warmth and comfort, but also effectively solves the cold problem during the cold season. However, when using a heater, we also need to pay attention to some safety issues. Fortunately, most heaters are equipped with an overheat circuit protection system, which can monitor the temperature of the body. Once the temperature is too high, the temperature limiter will automatically cut off the power supply to avoid accidents caused by abnormally high temperatures. So, when we use a heater, there is no need to worry about accidents caused by excessive body temperature. Once the heater is cut off due to overheating, we only need to patiently wait for the temperature of the body to drop, and then plug in the power again to restart.