Industrial air conditioner.
The cooling principle of industrial air conditioners (evaporative air conditioners) is that when the fan is running, negative pressure is generated inside the chamber, causing external air to flow through the porous and moist surface of the wet curtain, forcing the dry bulb temperature of the air passing through the curtain to drop to a temperature close to the wet bulb temperature of the external air. That is, the dry bulb temperature at the outlet of the air conditioner is 5-12 ℃ lower than the outdoor dry bulb temperature (up to 15 ℃ in dry and hot areas).
The drier the air, the greater the temperature difference, and the better the cooling effect. Due to the fact that the air is always introduced from the outside into the indoor environment (referred to as a positive pressure system at this time), it can maintain the freshness of indoor air; At the same time, due to the principle of evaporative cooling, this machine has dual functions of cooling and humidifying (relative temperature can reach about 75%). When used in workshops such as textile and knitting, it not only improves the cooling and heating conditions, but also purifies the air, reduces needle breakage rate during needle spinning, and improves the quality of needle textile products.
Common safety issues of mobile industrial air conditioners.
Power cord issue: Power cord issue is one of the most common safety issues in the use of mobile industrial air coolers. The circuit is correct, and the wire specifications meet the requirements.
Solution: You should choose to use wires and plugs that meet specifications, and ensure that the plugs are inserted tightly to avoid poor contact. At the same time, users should regularly check whether the electrical equipment is complete, such as whether the household appliances are aging, whether the plugs are loose, and repair them in a timely manner.
Stable installation issue: Mobile industrial air conditioners often need to be placed on a stable ground and fixed properly, otherwise they may tip over during operation, causing negative damage and other issues.
Solution: When using a mobile industrial air conditioner, the obstacles placed on the ground should be cleared first, and then it should be placed on a stable ground, such as water or mud, and fixed on the ground with fixing parts to ensure its stable operation.
Refrigerant leakage problem: Mobile industrial refrigerators use refrigerant for refrigeration, and if the refrigerant leaks, it may cause damage to the human body.
Solution: When using mobile industrial air conditioners, the refrigeration system should be regularly checked to ensure good sealing performance. Type industry air conditioners, and skilled professionals for maintenance and handling.
Overload problem: If the mobile industrial air conditioner operates under overload, it may cause electrical equipment damage, overheating, and other problems. In severe cases, it may cause fire and other safety hazards.
Solution: When using a mobile industrial air conditioner, it should be ensured that it operates under the appropriate load. Protection, such as turning on ventilation equipment, lowering working temperature, etc.
In summary, the safety issues of mobile industrial air conditioners need to be given sufficient attention. Such as correct wiring, stable installation, regular maintenance, etc. to ensure its safe and reliable operation. At the same time, if encountering any safety issues, it is necessary to stop using it in a timely manner and seek professional assistance for maintenance.
The repair and maintenance of mobile industrial air conditioners are crucial for their normal operation and extended service life. The following are some common repair and maintenance measures:
Clean the filter
The filters of mobile industrial air coolers need to be cleaned regularly to ensure air circulation and filtration efficiency. Add the risk of machine failure. Therefore, it is recommended to clean the filter after a period of time for each malfunction, and the specific frequency can be determined based on usage.
Regularly inspect the cooling condenser and evaporator
The condenser and evaporator are the core components of mobile industrial air coolers and require regular inspection and maintenance. The surface of the condenser should be kept clean without any removal, which can ensure the heat dissipation effect of the air conditioner. The evaporator needs regular maintenance and cleaning to avoid any blockage or pollution that may affect its effectiveness.
Check electrical wiring and control system
The electrical wiring and control system of mobile industrial air coolers also require regular maintenance and repair. Check if the wires and plugs are damaged, and replace them promptly if there is any damage. Check the operation of the control system to ensure that all parameters are normal and there are no abnormalities.
Regular maintenance
Regular maintenance is one of the important maintenance measures for mobile industrial air coolers. It is generally recommended to conduct a major maintenance once a year, including inspecting electrical components, cleaning booths, cleaning graves and evaporators, and checking the refrigeration system. If any faults or abnormalities are found, they need to be promptly modified or changed.
In summary, the repair and maintenance of mobile industrial air conditioners are crucial for their normal operation and extended service life. Regular cleaning, maintenance, and upkeep can reliably ensure efficiency while also reducing the risk of machine malfunctions.
SIAL
SIAL mobile air conditioner is a cooling device that adopts the principle of compressor refrigeration. The air outlet is the real air conditioning air, which is truly refrigerated and does not require water or ice crystals. It has the advantages of no installation, plug in, and use. Provide solutions for ventilation and cooling in various industrial and commercial scenarios. Compressor refrigeration, true air conditioning air, extremely hot and stuffy, instantly dissipated. Integrated design, no installation required, plug in and use. 360 ° detachable rotating cold air outlet, cool throughout every corner. Built in large capacity water tank, no need to worry about drainage issues. Strong and concentrated wind, with longer cooling wind distance